Начало »
Каталог »
Входно-изходни у-ва »
USB Карти и Устройства »
HUB USB3-C to 4xUSB3 A, Round, AXAGON HUE-P1C
HUB USB3-C to 4xUSB3 A, Round, AXAGON HUE-P1C
Кат. номер: 2902325
Цена: 21.38 лв. с ДДС
Лизингов Калкулатор
За да закупите продукти на лизинг от Ресет Компютърс ЕООД чрез Уникредит Кънсюмър Файненсинг АД, общата стойност на Вашата поръчка трябва да е не по-малко от 150 лева с ДДС.
TBI Credit |
Уникредит Булбанк | |
6 месеца | 3.88 лв. на месец | 3.88 лв. на месец |
12 месеца | 2.10 лв. на месец | 2.08 лв. на месец |
18 месеца | 1.51 лв. на месец | 1.49 лв. на месец |
24 месеца | 1.21 лв. на месец | 1.20 лв. на месец |
Основни параметри:
- Производител: AXAGON
- Предназначение: USB хъбoве
- Видове у-ва: Външни
- Интерфейси: USB 3.0
- Свързване: USB, USB3.1 Type C
- Др. параметри: 4x порта
Как се поръчва | Начини за плащане | Доставка
- Категория: Входно-изходни у-ва
- Подкатегория: USB Карти и Устройства
- 0 коментара
Детайлна информация / Технически характеристики
{{{{HUE-P1C SuperSpeed USB-C ROUND hub
Universal four-port USB 3.2 Gen 1 hub. Connector for external power supply. USB-C cable 30 cm.
Input | USB 3.2 Gen 1 |
Output | USB 3.2 Gen 1, 4-port output |
PC connection | USB type C-M, permanently connected cable, cable 30 cm |
Power supply | on the bus, through power adapter |
The round USB-C 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-P1C easily and quickly connects up to four USB devices to a laptop or computer at the same time. Three USB ports are located around the perimeter and allow seamless connection of any USB device incl. bulky flash drives or USB readers. The fourth, upper USB port, is ideal for connecting a wireless adapter for better signal reception or for easy insertion of a flash drive with one hand. The rubber pad prevent slipping up on the table. Fixed 30 cm long USB cable is ideal for mobile devices users.
This compackt hub can also handle the permanent connection of several external drives. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks or increase the number of mobile phones you can charge. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5 Gb/s. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Apple iPhone, iPad etc.
The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone.
Input:
• 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• Connecting USB type C male connector on a fixed 30 cm long cable.
Outputs:
• 4x SuperSpeed USB port, USB-A female connectors.
• Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).
• The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).
Features:
• Possibility to connect your device while running thanks to the Hot Plug support.
• Full Plug and Play support.
• Standby mode support.
• High quality shielded cable ensures fast communication speed and minimal unwanted interference.
• Blue LED indicates the connection to the computer's USB port.
• Dimensions Ø 60 x 18 mm.
• Weight 43 g (incl. cable).
• USB cable length 30 cm.
The hub power mode via USB cable (bus power):
• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports.
• In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously.
• Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port).
The hub power mode via USB + external USB charger (self power):
• Integrated micro USB connector for additional powering the hub.
• Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A).
• In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets.
Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports, the total charging current (which is divided into ports) reaches up to 4.5A at 5V (depending on the capabilities of the external power adapter).
Supported OS:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.
Package contains:
• SuperSpeed USB-C hub with fixed 30 cm long cable,
• multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
• packed in a cardboard box with a hanging hole.
interface | USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 / USB 2.0 / USB 1.1 |
rate | 5000 / 480 / 12 / 1.5 Mbit/s (super / high / full / low speed) |
connector | USB Type A male (on the cable) |
cable | 30 cm, permanently connected |
Output | |
interface | USB 3.2 Gen 1 |
number of ports | 4 |
connector | USB Type A female |
Supported features | |
max. charging current / port | 1.5 A (5V) USB bus power |
total charging current | 4.5 A (5V) Self power |
overload protection | yes |
automatic installation | yes |
Plug and Play | yes |
Hot Plug | yes |
Other features | |
indication | 1 LED |
dimensions | Ø 60 x 18 mm |
weight | 43 g |
Power supply | |
on the bus | USB bus power |
through power adapter | 5V micro USB |
OS support | |
MS Windows | 10 / 8.1 / 8 / 7 / Vista / XP (all 32- and 64-bit versions) |
MS Windows Server | 2016 / 2012 / 2008 / 2003 (all 32- and 64-bit versions) |
Mac OS | X 10.4.x and higher |
Linux | kernel 2.6.x and higher |
Android | all versions ( ! - verify support at the Android device manufacturer) |